|Terms of Trade:||FOB,CFR,CIF,EXW|
|Min. Order:||1 Set/Sets|
|Delivery Time:||30 Days|
Model No.: FG100A
The F100A series all-digital universal low voltage converter from FGI is suitable for frequency conversion speed regulation of three-phase asynchronous motor. The low voltage inverters are widely used in the speed regulation and system modification of AC asynchronous motor in the fields of textile, printing and dyeing, food, pharmaceutical, machinery, water supply and electronics. The low voltage variable frequency drive has the control mode of V/F control, sensorless vector control (SVC), torque control and so on.
Structure---Parts of Low Voltage Inverter
Keypad Schematic Diagram
Functional key description
Program/Escape---Enter or escape from the first level menu.
Data enter Key---Progressively enter menu and confirm parameters.
Digital modify key---Progressively increase data or function codes.
Digital modify key---Progressive decrease data or function codes.
Shift Key---In parameter setting mode, press this button to select the bit to be modified. In other modes, cyclically displays parameters by right shift.
Run Key---Start to run the inverter in keypad control mode.
Stop/Reset Key---In running status, restricted by P7.04, can be used to stop the inverter. When fault alarm, can be used to reset the inverter without any restriction.
Shortcut Key---Determined by Function Code P7.03: 0:splay status switching, 1:jog operation, 2:Switch between forward and reverse, 3:Clear the UP/DOWN terminals settings, 4:Quick debugging mode
Combination Key---Pressing the ［RUN］ and ［STOP/RST］ at the same time can achieve inverter coast to stop.
Input & Output
Input Voltage Range: 380-480V/690V±10% Input Frequency Range: 47~63Hz
Output Voltage Range: 0~rated input voltage Output Frequency Range: 0〜400Hz
Programmable Digital Input: Provide 7 terminals which can support ON-OFF inputs, 1 terminal which can support high speed pulse input and support PNP, NPN
Programmable Analog Input: AI1 can accept input of -10V 〜10V,AI2 can accept input of 0〜10V or 0〜20mA.
Programmable Open Collector Output: Provide 1 output terminal (open collector output or high speed pulse output)
Relay Output: Provide 2 output terminals
Analog Output: Provide 2 output terminal, whose output scope can be 0/4~20 mA or 0〜10 V,as chosen.
Main Control Function
Control Mode: V/F control, Sensorless Vector Control (SVC), Torque control
Overload Capacity: 60s with 150% of rated current, 10s with 180% of rated current.
Speed Adjusting Range: 1:100 (SVC)
Carrier Frequency: 1 kHz ~15.0 kHz.
Frequency reference source: keypad, analog input, HDI, serial communication, multi-stage speed, simple PLC and PID setting. The combination of multi-modes and the switch between different modes can be realized.
PID Control Function
Simple PLC, Multi-Steps Speed Control Function: 16 stages speed can be set.
Traverse Control Function
None-Stop when instantaneous power off
Speed Trace Function: Smoothly start the running motor
［FR/JOG］ Key: User defined shortcut key can be realized
Automatic Voltage Regulation Function (AVR):Automatically keep the output voltage stable when input voltage fluctuating
Fault protections: Protect from over current, over voltage, under voltage, over temperature, phase failure, over load etc
200%---Overload Capacity: 160% for 60 seconds, 180% for 10 seconds, 200% for 1 second
50%---Ambient Temperature: without derating up to 50℃, optimized cooling system, robust design
180%---Start Torque: 0.5Hz/150%(V/f), 0.25Hz/180%(SVC)
±15%---Input Voltage Fluctuation: flexible with big voltage fluctuation, motor runs stably, high reliability
CPU: latest technology of TI, high speed, high performance, high reliability
Keypad: detachable, standard internet cables used, 35 meters can be extended, two lines display( >7.5kW)
Flying start function: restart the running motor smoothly, no current surge,high accuracy
IGBT: selection of large margin, current>2 times of inverter current
Product Model Description
Model No Input Voltage Rated power(kW) Rated Output Current(A)
FG100A-4T007G/011P 3-phase 0.75/1.1 2.5/3.0
FG100A-4T011G/015P (380-480V)±10% 1.1/1.5 3.0/3.7
FG100A-4T015G/022P 1.5/2.2 3.7/5.0
FG100A-6T110G 3-phase 11 15
FG100A-6T150G 690V±10% 15 18
FG100A-6T185G 18.5 22
Wide Range of Applications
Open-loop vector control, suitable for most applications, no need to separately stock different inverters for different motors;
Good control performance: 0.25Hz/150% starting torque, multiple braking modes for fast braking;
Strong Environmental Adaptability
Compact structure design, independent air duct design, multiple installation methods, greatly increased power density, effectively reducing user installation volume requirements, meeting demanding user installation conditions;
The fully independent air duct design effectively improves the protection effect of the inverter and adapts to various complicated user site environments;
Rich in Function
1. Speed tracking to achieve restart of the running motor;
2. AVR (Automatic Voltage Regulation) function keeps the output voltage of the inverter stable even if the input voltage fluctuates.
3. Built-in PID function.
4. Built-in standard modbus communication protocol.
The thermal simulation technology was introduced, and all models were subjected to thermodynamic simulation to effectively plan the heat dissipation of the whole machine and improve product reliability.
All products have been verified by complex products such as high temperature, low temperature, low pressure, vibration, etc., ensuring the reliability of the product from the source;
Powerful hardware configuration: wide voltage range input, support for DC input, common DC bus design, built-in braking unit (less than 18.5kW), high-performance LED keyboard for external reference, numerous I/O Terminals, etc.
Optional expansion options such as expansion cards, filters, auxiliary power supplies, brake units and reactors are available.
Temperature and Humidity
The ambient temperature is among-10 °C~ +40 °C and the frequency inverter has to derate by 4% for every additional 1 °C if the ambient temperature exceeds 40 °C. The temperature cap is 50 °C. Relative humidity of the air≤ 90%. No condensation is allowed.
The low voltage inverter can run at the rated power if the installation site is less than 1000m(including 1000m) above the sea level. But it has to derate if the altitude exceeds 1000m. See the following figure for details:(Relationship between output current and altitude)
Other Environment Requirements
The low voltage drives can not bear fierce impact or shock. So the oscillation range should be less than 5.8m/s2(0.6g).
The low voltage converter should keep away from the electromagnetic radiation source.
The low voltage boost converter drive should keep away from water and condensation.
The low voltage driver should keep away from contaminative air, such as corrosive gas, oil mist and conductive dust.
The low voltage inverters should keep away from direct sunlight, oil mist, steam and vibration environment.
Add the air deflector when apply the up-down installation.
IQC---》SMD---》Components Test---》 PCBA Coating---》Assembly---》50 °C Aging Test(24 hours)---》Loading Test---》Packing and Dispatching
Widely used in textile, paper, wire drawing, machine tools, packaging, food, fans, pumps and various automated production equipment. Providing highly integrated and integrated solutions for equipment manufacturing and end customers, it is of great help to reduce system procurement and operating costs and improve system reliability.
OEM Service is available
After-sales responding within 24 hours
One to one pre-sales consulting services
We are factory with high-tech professional engineer teams
Technician could be assigned to go abroad to carry out site commissioning and technical training
FGI-Tech, a diversified electrical supplier and manufacturer, provides world class AC motor products - medium voltage drives and explosion-proof AC inverter, advanced power distribution systems and power quality solutions. FGI-Tech is committed to innovating energy technology to make broad contributions to the world in the fields of industry automation and energy power".
The FGI-Tech's medium voltage variable frequency drives, feature a unique technology that allows FGI-Tech to offer a simple, flexible and reliable drive solution. Building on many years of experience, FGI-Tech has demonstrated capability as innovator with an imaginative approach to the design and development of high performance electric power systems, enabling greater affordability, efficiency and reliability.
FGI-Tech's BPJV series mining explosion-proof and intrinsically safe AC inverter as one of the high-tech products which combine digital frequency speed regulation technology and related cooling technology. It is widely used in coal mine with coal dust, gas and other explosive dangerous environment, dragging speed governing operation of motor to achieve soft start and soft stop, stepless speed regulation and other functions when the motor is overloaded.
FGI-Tech's distribution transformers are manufactured using the highest quality materials, employing the most modern and reliable manufacturing practices. These Transformers are used for indoor or outdoor applications and can be provided with off-load and on-load tap changers.
FGI-Tech's power quality products consist of static var generators (STATCOM). SVG is the best solution in the reactive power control field at present and has unparalleled advantages. It makes energy more efficient by stepless power factor correction. It is widely used in the application of Renewable power generation, Electrical welding systems, Industrial production machines and so on.
At FGI-Tech we believe in building strong relationships, helping our customers through the complete product life cycle, from selection and electrical system design through to commissioning assistance and after sales service and support. FGI-Tech supports electricity infrastructure with proven technologies to ensure that energy can be supplied in a stable, reliable, and optimal manner.
With standard controls, critical parts, packaged assemblies, and electrical/electronic components are stocked and ready to ship from FGI-Tech.
FGI-Tech aims to pursue innovation in energy and environment technology and to continue creating high-value-added, environmentally friendly products and systems that allow energy to be used stably and with maximum efficiency.
We hope that you are always holding FGI-Tech to high standards.